Posts

6 Tree Stand Exit Strategies for Hunting the Rut

November 2, 2016/1 Comment/in Climbers, Fixed Position, Got Game Blog, Ladder Stand, Quad-Pods and Box Blinds /by Big Game

Exiting Your Tree Stand Undetected While Hunting the Rut

Getting to your hunting tree stand undetected is a prerequisite for choosing a spot to hang it. If you cannot navigate through the woods silently and scent free then the game is up. You will spend countless hours staring at an empty forest or field edge. However, increasing success in the rut is not only about the route you take to your stand but also how you exit it. With that said, how come hunters spend very little time trying to conceal their exit from their tree stands?

Few too many hunters do not consider their tree stand exit strategy. How many times have you climbed down, packed your tree stand accessories and started out only to be startled by the sound of a deer snorting at you? Whether there are deer around you as darkness looms or you simply want to reduce your presence in a prime rut location, having a plan for leaving your stand, or your hunting blind, can produce results that may otherwise be unnoticed. Having a tree stand exit strategy is as important as planning your entry route. Even if you have not seen any deer, carelessly exiting your tree stands can blow your chances when hunting the rut.

Planning for an Exit

The rut is different as we all know. Deer are completely out of their early fall patterns and many mature bucks are in chase mode. This time of year it is even more important to have a clean and clear stand exit strategy. Hunting the rut only gives you a small window of time to hunt so preparing beforehand is critical to making every day count.

Low-impact is what you are trying to achieve, both entering and exiting your tree stands. Planning for an exit from a stand is accomplished with good preparation. Complete scouting of areas to determine likely deer movements, habitat features and prime forage areas helps to determine where to hang a tree stand but it also gives you an idea of how to get in and out.

Use maps and aerial photos of your hunting area to pick routes that will disturb deer the least. Avoid areas that could be used for bedding spots like thickets near reliable food sources and defined funnels that bucks can be patrolling during the rut. You also want to avoid noticeable buck activity like scrapes and rub lines. Leaving hunting stands and blinds by crossing a scrape line will get you noticed by the big boys and blanked for the rest of the rut!

Another part of hunting the rut is planning to take your time not only hunting but when you are exiting your stand. Hunters take their time getting to their tree stands, wait patiently for a buck to approach while in them but leave in a flurry like something is chasing them. Rushing to exit your stand will create unnecessary noise as you rush to collect all your necessary hunting accessories alerting any deer that may be off in the distant shadows. Plan you exit routes so that you can take your time getting out of your hunting locations silently.

Additionally, effective entry routes may not make the best exit paths. Entering a hunting location depends on a number of factors like season, time of day and weather. Each of these three factors, along with others, impact how you should enter a particular spot. The same holds true for exiting any of your portable or ladder tree stands. Late in the day deer may be approaching food sources unlike when you started hunting when they may have been near bedding areas. You want to make sure your exit plans take these factors into account. Finally, conditions should also dictate if you should even hunt a particular stand on a given day. If the conditions (wind, changing deer activity, etc.) are not going to allow you to exit without making your presence known then choosing a tree stand location somewhere else is in your best interest.

Common Sense Ways to Exit Your Tree Stands

Before we get into specific tree stand exit strategies, there are a few common sense approaches to leaving your hunting tree stands. The more you are careful when leaving your tree stands the more productive they will be during the rut.

No Talking – Not hard to do if you are hunting by yourself but when hunting with a friend the temptation to ask about what they saw is overwhelming. Save the stories for the truck.

Stay Concealed – If you are leaving a stand during daylight hours, keep your camo on until you at least get out of your main hunting area. Stripping down to a visible base layer shirt can easily get you picked out while leaving your stand.

Lower Lumens – Flashlights are a must for exiting tree stands at night but avoid those that could be substituted for a spotlight. Use just enough light to get out quietly or change to a colored variant that is less visible by deer.

6 Tree Stand Exit Strategies

How many times has the sun slipped away and you hear the sounds of approaching deer in the distance? Shooting light is no more but you can just make out the outline of a deer body followed by the shine of antlers. It is too dark to shoot but you do not want to ruin this location for future hunts, so what are your exit options? Hopefully, this example is an exception and not the rule when you are hunting the rut. Regardless, it pays to have a good exit strategy from your hunting stands and blinds. Here are five ways to get out of your stand when deer are nearby.

Stay Put. The best option when deer are around you after shooting light or when you need to get out of your stand is to wait them out. Staying in your stand until they have moved on will keep them from realizing you are there and potentially blowing your hunting spot in the future. After they are gone, slip down and leave quietly. The downside is this may take all night!

Announce Your Presence. There are times when you cannot wait them out. When you have to go, spooking them with something other than “I am a hunter” is the next best strategy. Carry a coyote howl or other predator call with you for these situations. Sounding off a predator call will have any deer in your vicinity heading away without directly connecting their alarm to your tree stand. Use this sparingly and only when staying put is not an option. Use this strategy too much, however, and deer start to know something is up.

Go Wide. Sometimes deer are not directly under your stand but rather feeding in a nearby field or food plot. For these instances, slowly and quietly climb down or exit your archery blind and take a wide path around the deer as to not let them know you are there.

Multiple Escape Routes. Being able to go wide when leaving your stand is only possible when you have planned multiple exit locations. You want to have one main exit path, pre-planned as described earlier and up to two alternative locations to exit from. This is critical when hunting the rut as deer can be anywhere chasing does and your first choice may not be available. Using trail makers can help you identify alternative routes when the time comes to use them.

Choose Wisely. Not only do you need multiple exit routes but they should be chosen wisely. Stay away from active deer areas like food sources. Also, trim exit paths to avoid brush busting and spreading scent as you leave your tree stands.

Use Common Disturbances. This technique requires the right area and some help. When hunting urban areas and agricultural spots, deer are used to cars, trucks, tractors and other common disturbances. Having one of these spook deer away from you is natural for deer in these areas. Take advantage of waiting for a car to pass by or call in a buddy to bring the tractor to the field to push deer away from your hunting stands and blinds. Deer will vacate and will just think it is another normal day to day disturbance, which they will not associate with your hunting spot.

There are many tips for hunting the rut but being undetected is often your best hunting strategy. Mature bucks will be cruising for does and deer, in general, will be outside of their normal patterns. It is more important this time of year to stay concealed than deciding where to hang a tree stand. An average stand location with the ability to get in and more importantly out concealed is better than one that has difficult access but sits over exceptional deer sign. What is the point to sit over sign if you are alerting everything in the woods to your existence? Exiting silently will make for better future hunts in the rut and increase your chances of running into a mature buck. Seeing bucks in the rut is not always related to the amount of rut activity (scrapes and rubs) but rather it is connected to the number of deer you alert to and from your tree stands.

Exiting your tree stands should always be done methodically. From collecting all your tree stand accessories to safely climbing down, the end of a hunt is not the time to get sloppy. The same holds true for leaving your hunting area. If you are not well prepared or you have not thought of tree stand exit strategies, you may reduce your chances the next time you return to that particular spot. It is all about staying undetected during the rut. Be conscious of remaining concealed from start to finish of every hunt because that is what separates those who are consistently successful from those that are consistently baffled.

tree stand blinds tree stand concealment | Big Game Treestands

Big Game Tree Stand Blinds | How to Create Tree Stand Concealment

June 30, 2016/0 Comments/in Got Game Blog, Ground Blinds, Ladder Stand /by Big Game

Camouflage Cover for Tree Stand Concealment | Tree Stand Blinds

Imagine sitting in your tree stand on opening morning. As the first rays of sunlight start shining through the autumn leaves, you hear a branch break. Just as you imagined, you spot a deer walking down the well-used trail you found earlier in the week. It’s a brand new stand site and the deer should have no clue you’re there. But as soon as it enters a slight clearing, its head shoots up and aims right at you. You didn’t make any noise and the wind is in your favor. But still, the deer turns and disappears faster than you can do anything to stop it. All because you didn’t take time to hide your tree stand with tree stand blinds. If you’ve hunted long enough, you’ve probably had an experience like this.

Whitetails are remarkable at spotting differences in their environment. Their eyes are amazingly adapted at finding things that stick out from their surroundings; a new tree stand, for example. In order to beat this amazing sense of theirs, you have to take a little more care to hide your tree stand when you hang a new stand. This often includes installing tree stand blinds. If you’re hunting unpressured private land deer, you can probably get away with less. But the steps below are almost a requirement for public land hunting these days.

It’s no doubt that ground blinds can be much more easily hidden than tree stands. They are low to the ground and can be covered with all manner of camouflage patterns and branches. But they can be more difficult to hunt deer out of sometimes. You don’t have the height advantage on your side, for one thing, which inhibits your prey detection and prevents any longer shots. But there are some things you can do with tree stand concealment to hide it just as effectively as a ground blind.

How to Hide Your Tree Stand

One of the first tips if you’re using a really old stand is to either get a new one or freshen it up. If there aren’t any safety concerns, then painting a tree stand or just installing tree stand blinds could do the trick to help it blend in better. Grab a couple cans of spray paint, in black and various shades of brown, green, and yellow. Next, collect some natural materials (e.g., grasses, weeds, branches, leaves, etc.) from the area you’re going to hunt. Spray a light background color, such as sage green, all over your stand. Then either sparsely lay some of the natural materials on top of the stand, or tie them down with some twine. Once they’re tight against the metal frame, spray a mustard yellow or brown paint over the top. Add some more materials over the top of these, and lightly spray a black color over what’s left. You can experiment with the colors and which sequence you spray them in, but focus on colors that match the season you’re hunting in. In other words, no bright green colors if you’ll be hunting in late autumn. You can quickly camouflage a deer stand with a couple cans of paint and a few hours.

One of the best deer stand concealment steps you can take is to simply take advantage of the natural cover around you. There are no synthetic materials that can beat the natural vegetation in an area in terms of camouflage value offered. That being said, some trees are better suited to hanging a new stand than others. For example, trees with multiple trunks or lots of branches work great since they offer so much natural camouflage and structure that you can hide in. Pines, cedars, and oaks come to mind as excellent choices since they generally have a dense branch structure and maintain their needles or leaves through most of the hunting season or year-round. These trees are excellent choices for hang on stands, since you can tuck them right into the branches. With a good set of camouflage clothing, you should stay pretty hidden.

Deciduous trees with bare trunks (e.g., aspens, maples, birch, etc.) are great for ladder stands, but you tend to stick out like a sore thumb without any ladder stand concealment. If you must hunt from a tree such as this, you should definitely use a tree stand blind kit or camouflage burlap. Wrapping the seat and platform of a ladder stand is a great way to at least hide your movements while in the tree. Using fabric with loose-cut leaves is even better since it adds a natural look and motion. These tree stand blinds are simple to carry with you while hanging stands, and do so much to hide your profile. Simply drape the fabric or ladder stand blind kit around the shooting rail and use twine or zip ties to secure it thoroughly. Leave a slit opening at the front so you can climb into the stand with all your bulky hunting clothing and gear. There’s nothing worse than trying to quietly slither through a narrow gap on opening morning, realizing that a knife is the only way you’re going to get into your stand.

While this definitely helps hide your movement from keen eyes, a large bulky shape in the sky among a bunch of bare trunks still sticks out to deer. Another way to really hide your tree stand involves a more three dimensional application. Real or fake branches are excellent to blend into the surrounding area. Using tree stand concealment branches can be done in two ways. The first is to collect some actual branches from near your stand, preferably live ones with leaves still on them for deciduous trees (oaks tend to hold onto their leaves longer than many others), or coniferous branches for a coniferous tree. The other is to stock up on fake Christmas tree branches when they go on sale at the end of the year. Obviously, these are more useful for coniferous trees. Either way, attach the branches to your stand with twine or zip ties, spreading them out evenly to hide your profile. You want enough branches so that it looks natural and blends in, but not so many that it sticks out (when’s the last time you saw a ball of branches extending every direction 20 feet up a tree?). And you definitely want to make sure to leave yourself ample shooting lanes for close-range bow shots. Too often, we don’t know when to stop and suddenly realize we can’t see the ground from a sitting position.

Height Matters

The final way to really hide your tree stand is not so much a mechanical add-on or fancy camouflage system of tree stand blinds. It simply involves hanging your tree stand higher. Climbing stands and lock-on stands makes this is easily doable. Well-educated public land deer have come to expect to see hunters at the typical 10 to 15 foot range off the ground. So if you can sneak up a little higher, say 20-25 feet, you’ll be further out of their peripheral vision. If you go much higher than that, your shot angle can be too severe to get a double lung pass-through. Make sure to stay safe while hunting higher and always use a hunting safety harness. And of course, pay attention to your state hunting regulations as some states have maximum allowable tree stand heights.

While you’re out deer scouting this summer, pay attention to the surrounding trees and think of ways that you could hide your tree stand better. Using all of the steps above whether it is natural cover or tree stand blinds, it should leave you pretty invisible to all but the wisest whitetails. You’ll need a little luck on your side to get close to them.

Using Desktop Scouting to Position Your Tree Stand

May 3, 2016/0 Comments/in Fixed Position, Got Game Blog, Ladder Stand, Quad-Pods and Box Blinds, Tripods /by Big Game

Tree Stand Placement | How Aerial Deer Scouting Techniques Can Lead To Great Sets

Tell me if you’ve been here before. After wandering through the woods for hours carrying your tree stand, things get depressing. You still haven’t found the magic tree that you were hoping to find and you saw very little deer sign either. Finally, you give up the search and reluctantly hang your stand in a less than ideal location on the off chance that you’ll get lucky. What if we could magically change that outcome for you? Let us introduce aerial deer scouting.

Aerial scouting would be way easier if we could ethically go deer scouting with drones. But even with its slightly less exciting approach, it’s still a very effective method of finding high percentage spots to hunt. Simply open up your favorite online mapping program, and navigate to your hunting land. That’s where the fun begins. We’ll talk about that some more below, but first let’s define what we mean by aerial scouting.

What’s the Difference?

Traditional scouting means boots-on-the-ground walking of public or private land properties. It’s time- and labor-intensive and you may go through all of the effort to find nothing. But you can also learn a lot about a new property using that approach, so don’t completely throw it out the window. Aerial scouting consists of opening up a deer scouting software and doing a lot of that legwork before you even physically set foot there. You can do it from a library, in your home office, or even lounging on the couch. Once you locate some good-looking spots from the map, you can then field verify them using the traditional deer scouting techniques. It allows you to cover way more ground, but you do need to eventually physically investigate a site before you commit to hanging tree stands. Those are the primary benefits and drawbacks of each scouting approach. Now let’s discuss how you can start your aerial assault.

How to Use Aerial Deer Scouting

The best thing about aerial scouting is that it frees up your time by eliminating 90 percent of a property before you even arrive. That’s time not spent wandering through the woods getting poison ivy or battling mosquitoes, which is undeniably great. But since time is our most precious commodity, that time-saving aspect is worth its weight in gold.

Deer Hunting Strategies| Scouting A New Property With Aerials

(Video) – There is a wrong way and a right way to scout. This especially true when we are just months or even weeks out from deer hunting season. The key during this late summer period is minimal disturbance and scouting smart.

As we briefly mentioned, download and install any deer hunting mapping software you want to use. Alternatively, Google Earth is one of the easiest free deer scouting software programs to use and it’s very user-friendly for a wide audience. You can find dozens of different map features (layers) online that can help you for scouting whitetails. For example, many counties offer free layers with property ownership information, which is basically a plat book on steroids. Many governmental agencies provide wetland, topographic, soil, or land cover layers, which you can turn on and off to create your perfect map. To find these layers, simply use a search engine to look for terms like, “topographic map google earth.” After collecting the data sources, it’s time to start deer scouting the smart way.

If you’re simply looking for new spots to hang your tree stands on a property you already have access to hunt, jump ahead at this point. If you’re looking for a new property, turn on the plat map layer to find public lands near you or promising private lands that you could then ask the landowner to hunt. Once you find some spots that look good, you’re ready to continue.

Start by turning on the wetlands layer, and you’ll likely eliminate many spots right off the bat that look like forest on the aerial but are actually intense shrub swamps you wouldn’t want to venture into with a tree stand. Locate any likely feeding areas by looking for open meadows, agricultural fields, pastures, or recent clear cuts. Since whitetails are browsing generalists, you can bet that they feed just about anywhere there is vegetation, but these are the most likely spots to focus on. If you wish, use the mapping tools to draw a green colored polygon (or any other color you prefer) around each one so that they stand out as feeding areas. Once you’ve found those, now try to pick out possible bedding areas. These will be much more challenging since deer can bed anywhere. However, south facing ridge slopes, conifer clusters, upland islands surrounded by wetlands, prairie grass plantings, and regrown clear cuts are some good spots to look for. Now mark these spots with a different colored polygon (brown or your preference).

Now we’re getting somewhere! Many people wonder how to find deer trails. Using only these two types of locations, look for possible travel routes between them, and you’re set. This is where it’s helpful to turn on topographic layers. Deer are fairly lazy creatures, and prefer to travel parallel to contour lines instead of against them, meaning they would rather walk along a ridge than straight up and down it. They’ll obviously make exceptions if the elevation changes aren’t very severe or if they get spooked, but keep this in mind as you’re searching. Also look for areas that are connected by natural or manmade corridors (e.g., logging trail connecting two clear cuts, conifer hedgerow connecting two fields, etc.). In agricultural areas, these travel corridors should be obvious and will likely be shrubby hedgerows and overgrown fence lines. Basically, any kind of structure that crosses relatively open agricultural land or fields will be used. On heavily forested properties, however, these trails may just follow the edge between two different habitats. Deer have plenty of structure in a forest, so you’re just looking for where several habitat types come together.

Using those corridors, try to identify a location along them that really funnels them to a good hunting spot. We call these spots “pinch points” because they squeeze the deer activity into a tightly bound location. Some examples include a six row windbreak narrowing down into two rows, a beaver pond and river coming together to funnel deer movement between them, or the middle of an hourglass-shaped food plot. If you can identify a spot like this that is near some mature trees where you could set your tree stands up, then you can move on to the next step below. If not, keep scanning the aerials to find a decent ambush site.

Field Verification

Now that you’ve theoretically found a handful of good tree stand locations, it’s time to put some miles on the boots and make sure that your hunches are correct. Whether it’s the middle of the summer or you’re doing some post season deer scouting, print out a map with your polygons and stand sites labeled on the aerial and bring it with you to the field. It may also be helpful to download Google Earth or similar mapping software on a smartphone (there are several smartphone hunting apps) so you can see exactly where you’re at and tweak your stand location while you’re in the woods.

Whether you use paper maps or technology, navigate to your pre-selected spots and take a look around. Does it look like you had envisioned when you were sitting at the computer screen? If it’s clearly not where you want to hunt, move on to the next spot. If it has some potential, though, it’s time to investigate a little more thoroughly. Even if it takes some slight re-adjustments of the original location, at least you didn’t spend all day wandering the woods to find it.

Scan your surroundings for deer sign along the funnel areas. If you chose well, you should be able to find a deer trail, droppings, or rubs without too much effort. Ideally, you’ll find a heavily-worn trail with plenty of scat, and several past rubs lining the way. Now do you see any good-sized trees overlooking this trail that could hide your profile once sitting in the stand? Try to stay away from aspen, ash, or birch trees as they generally don’t have a wide enough profile to hide your silhouette. However, oaks, maples, and conifers usually have enough structure at height to help you disappear.

Stealthy Access and Wind Direction are Critical

Alright, you think you’ve found the perfect spot, but did you miss something important? Most hunters focus too much on the stand location in terms of deer sign, and completely neglect the access side of things. This is one of the most important deer scouting tips. If you can’t sneak in and out of your location without spooking the deer, then the perfect tree you found is actually garbage. By hunting it, you risk disrupting normal deer behavior and travel patterns, making your top-notch pinch point useless. Similarly, if you see a perfect tree on the predominantly upwind side of the trail and still decide to hang a stand there, you could spend more time educating deer to your presence than seeing mature bucks. And that is not the goal.

Take another look at the aerial map and see if there’s a way you could approach and leave the stand location without crossing the deer trail or otherwise leaving any sign you were there. Since you’re perched on a deer trail versus bedding or feeding areas, it should be a little easier to do, but keep this in mind. For example, is there a ditch or creek near the funnel that you could use to navigate there without leaving much sign? Is there a steep ridge that deer are unlikely to use that you could approach from? Even if it means going out of your way a bit, it’s better to err on the side of caution when it comes to entry and exit routes. Yet many people ignore these basic whitetail deer hunting strategies because they get lazy.

Don’t set up tree stands on the upwind side of a trail if you can possibly help it. It’s better to choose a less-concealing tree downwind than perching in a great tree upwind. Why? You can sometimes fool a whitetail’s vision if you dress appropriately and don’t move. But it’s pretty much impossible to convince them you’re a tree after they get a nose full of human scent. For most of the whitetail range, the predominant wind direction is from the northwest, but there will be localized differences depending on the topography. Make an effort to understand that before you commit to a hunting spot.

The Best Tree Stands for Different Situations

Whew! You finally found the perfect hunting spot using your aerial deer scouting techniques and field verifying them. Now you need to decide what type of tree stand is best for the location. If your resources are somewhat limited, you may only have one stand to choose from, which makes this section pretty easy for you. But if you have a couple different types hanging in the garage or shed, this process can make a big difference in the ease of hunting and your ultimate success.

First, consider how difficult it would be to physically get tree stands to your final location. For example, do you really want to weave a ladder stand through a maze of aspen trees or brush, or haul it up a steep ridge by yourself? We’re guessing not. But a fixed position tree stand or climbing stand would be relatively easy to carry into remote sites full of the conditions above. Alternatively, if you’re hunting an open field or food plot with good access, you could easily use a side by side or ATV to haul a double-wide stand in. Along those same lines, will you be the only one hunting from the stand, or do you plan to take your kids with? The Duo is a great option for bringing along a hunting partner, no matter the age. The footrest, seat, and shooting rail all flip back to offer more room on the platform while setting up, but the stand is big enough for two people and is rated to hold 500 pounds of hunter and gear. For these reasons, it’s also one of the best ladder stands for big men, as well.

If you use hunting stands and blinds alike, you’re familiar with the challenges of private versus public land. When you primarily hunt on private land, you can leave your stands up throughout the season without much fear of it being stolen. Since you have that option, you can also choose larger, more permanent stands such as a tripod tree stand or box blind. But if you’ll be hunting public land, you’ll probably want to choose a climbing tree stand or fixed position stand that you can take with you or hope nobody notices it if you do leave it out. Your hunting personality will also play a role in deciding which tree stand to use. If you like to be very comfortable while in the woods and have all the tree stand accessories, including camouflage tree stand blinds, then a more spacious model might work better.

These considerations will all help you narrow down what kind of tree stands you decide to use. Whichever one you choose for your situation, you need to make sure that it’s safe by doing seasonal maintenance. The best option is to take it down at the end of the season and tighten all bolts, grease any moving parts, and renew your cables or straps.

The Final Touches

As you can now hopefully see, aerial deer scouting saves you from walking many, many miles to find new hunting hot spots. By first screening hunting properties and the land cover on them, you can eliminate 90 percent of the area, which saves you time and effort. Then you can focus on really examining the high priority spots in person. So this next season, spend some time deer scouting the smart way, with a refreshing beverage in hand and sitting on the couch.